The AEG LAVATHERM 76485AH Dryer has some known problems that occur often. Here are some easy to do solutions for the problems or error codes your AEG might be giving you.

1. Err (Error) on the display

You try to change the programme or the function after the start of the cycle.

2. Abnormally elapsing time on the display

The time to end is calculated on the basis of the volume and dampness of the laundry. The automatic procedure — this is not the appliance malfunction.

3. No drum light

Defective drum light.

4. Water container full — indication

By default the indication LED is always on. It comes into the view at the end of the cycle or when the water container is full.

5. Cleaning indication for primary filter

At the end of each cycle the applicable indicator (clean the primary filter) is on to tell you that the primary filter must be cleaned. The filter collects the fluff.

6. Cleaning indication for heat exchanger filters

If the applicable indicator (clean the heat exchanger filters) is on, the filters must be cleaned.

7. LED color changes to red

Indicates a change in programme or function.

Back to Home

AEG LAVATHERM 76485AH

;